X-Band Structures Workshop Agenda

Organizers: David Finley, Chris Adolphsen, Nobu Toge

Location: Yellow Room in the A&E Building

October 22 Morning: Experience to Date: Part One (Chair: Dave Finley)

9:00 Discussion of Diffusion Bonding of Conventionally Machined Cells with Chris Pearson

9:30 Harry Carter “Lessons Learned from FXA-001”

10:00 John Cornuelle “De-gassing Protocol and RGA Measurements”

10:30 Fifteen Minute Break

10:45 Bob Kirby “Etching Studies with Copper Coupons”  

11:15 Yasuo Higashi "HP Water Rinsing Experience at KEK and Future Plans"

11:30 Discussion of Cleaning Procedures for  FXB and FXC Structures

11:45 All Participants: Open Discussion

12:15 Lunch

October 22 Afternoon: Experience to Date: Part Two (Chair: Nobu Toge)

13:15 Chris Adolphsen  “High Power Processing Results and Future Plans”

14:00 Bob Kirby 1 & 2 & 3  “Analysis of DS2 Iris Surfaces After Processing”  

14:30 Yasuo Higashi "SEM and CMM Analysis of DS2 cells at KEK"

14:45 Fifteen Minute Break  

15:00 Roger Miller “Structures Tolerances With and Without Wakefield Suppression”

15:45 Gregg Kobliska “Fermilab CMM QC on FXA-001

16:15 All Participants: Open Discussion

16:45 End of Session

October 23 Morning: Quality Control Experience and Needs (Chair: Chris Adolphsen)

9:00 Nobu Toge  “Compatibilities and Conflicts Between Microwave and Mechanical Measurements and KEK QC Experience and Lessons”

9:30 Juwen Wang  “SLAC QC Experience and Lessons”

10:00 Ding Sun  “Fermilab RF QC on FXA-001”   

10:30 Nikolay Solyak  “Comparison of Microwave and Mechanical Measurements of FXA-001” 

11:00 Fifteen Minute Break

11:15 David Finley  “QC Needs for FXB and FXC Structures for 8Pack Test”

11:45 Gregg Kobliska “Involvement with SBIRs”

12:00 Chris Adolphsen “Measurements of Structure/Girder Alignment Stability”

12:15 All Participants: Open Discussion

12:30 Lunch

October 23 Afternoon: Collaboration Topics (Chair: Dave Finley)

13:30 Nobu Toge “X-Band Structure R&D Plans at KEK”  

14:00 Harry Carter “Engineering Teams for X-Band Structures Produced by Fermilab”

14:30 John Cornuelle “SLAC’s Participation in Engineering Teams & Summary of Action Items”

15:00 Thirty Minute Break

15:30 Discussion of Future Work

16:45 End of Workshop

This page created on 09/11/01 and updated on April 22, 2002 by Chris A.
[Disclaimers, Copyright, and Other Fine Print]