|
|
|
|
| Sunday | 9:00 | Plenary Session I | Accelerator Design, Simulation and R&D |
| 10:30 | Break | ||
| 11:00 | Plenary Session II | RF, High-Gradient and SLED-II/8 Pack | |
| 12:00 | BBQ | ||
| 1:30 | Working Group | (1.5 h) | |
| Zhenghai Li | Design Toward NLC/JLC Ready Structures (30) | ||
| Roger Jones | Wakefield Damping in H-Type and M-Type Linacs (20) | ||
| 3:00 | Break | ||
| 3:30 | Working Group | (0.45 h) | |
| Nikolay Solyak | Input and Output MC-Type FNAL Couplers (20) | ||
| Valery Dolgashev | Update on RF pulsed heating and choke accelerating structures | ||
| Sami Tantawi | Design of Choke Cavities (10) | ||
| 4:15 | Joint Session with Working Group 8-pack (1.0 h) | ||
| Monday | 9:00 | Session | National and International Processes |
| 10:30 | Break | ||
| 11:00 | Working Group | (1.0 h) | |
| Gennady Romanov | Details for X-Band Structures Tuning (20) | ||
| Cho Ng | Modeling High Gradient Structures (20) | ||
| 12:00 | Lunch | ||
| 1:30 | Working Group | (1.5 h) | |
| Janice Nelson | Acoustic Sensor Studies at NLCTA (20) | ||
| Nicoleta Baboi | Measuring Impedances for the NLC Accelerating Structures with Wire Method | ||
| Roger Jones | Dispersion Energy Compensation and Beam Loading in X-Band | ||
| Linacs (20) | |||
| 3:00 | Break | ||
| 3:30 | Working Group | (1.5 h) | |
| Tug Arkan | X-Band Structures Fabrication at FNAL Technical Division (30) | ||
| Toshi Higo | HDDS cell specification and fabrication in practice (20) | ||
| Yasuo Higashi | Engineering issues in fabrication of DDS cells (20) | ||
| Tuesday | 9:00 | Working Group | Open |
| 10:30 | Break | ||
| 11:00 | Working Group | Open | |
| 1:30 | Working Group Reports and Discussion | ||
| 3:00 | Break | ||
| 3:30 | Plenary | ||
| Adjourn |
