|
|
|
|
|
||
| Working Group Schedule: | ||
| Sunday 1:30 - 5:00 | Joint with Structures Group | |
| ROB A/B | ||
| 13:30 | Joint with Conv. Fac. | |
| Lounine - The layout of SLED II | ||
| in the linac tunnel | ||
| 15:00 | Break | |
| 15:30 | 8-Pack tour | |
| 16:00 | Joint with Acc. Structures | |
| 8-pack installation of FNAL structures in the NLCTA | ||
| Monday 10:30 - 5:00 | 8-pack Klystron, modulator and testing plans | |
| ROB Madorone | 11:00 | Nantista - Component design |
| Tantawi - Component testing | ||
| Chin - High power testing of components | ||
| 12:00 | Lunch | |
| 13:30 | Cassel - Overview of Status and Near-Term 8-Pack Plans | |
| Cassel - Current PLC Controls, Interface | ||
| Leyh - IGBT simulations, Modular on-board power supply | ||
| Break | ||
| 15:00 | Cook - New DFM Driver Boards | |
| Brooksby - New DFM 3D model & prototype mechanics | ||
| Nguyen/Cassel - New DFM Controls Conceptual design | ||
| Larsen - Two-pack thoughts | ||
| Tuesday 10:30 - 12:00 | Joint 10:30 with Structures Group | |
| ROB A/B | PPM klystron testing | |
| 9:00 | Vlieks et al PPM klystron test plans | |
| Round table discussion | ||
| 10:30 | Break | |
This page was created on
November 18, 2002 by
Nixx .
[Disclaimers, Copyright, and
Other Fine Print]
