NLC Technical Page   •  Meeting Schedule   •   SLAC Home Page 

NLC Collaboration Meeting (SLAC)

January 31 - February  2, 2000

Abstract

The goals for this U.S. NLC Collaboration meeting include review of the status of NLC accelerator physics, design, and technology, and formulation of plans for future developments. A specific goal of this meeting is finalization of detailed work plans and packages for the remainder of FY00 and definition of milestones for the continuation of work through FY01.

MONDAY

Plenary Sessions [0900 - 1200]

Working Group Break-Outs (permanent magnets) [1330-1700]

1. Discuss activities leading to September review[1330-1430]

• Present CDR 0.4 milestonesA. Ringwall
• Develop rough plans and milestones for PM'sAll

2. Prototype design discussion[1430-1630]

• Discuss comments from reviewsAll
• Magnetic design issuesAll
• Mechanical design issuesAll
• Build this design variant as prototype?All
• Resources, schedule for prototypeAll

3. Prepare progress report[1630-1700]

TUESDAY

Progress and Plans from Working Groups [0900 - 1000]

Working Group Break-Outs(permanent magnets) [1000-1700]

1. Prototype design discussion(con't)[1000-1030]

2. Beam physics requirements for injector, damping rings[1030-1200]

• Magnet candidates and requirements for injectorM. Schulze, J. Sheppard, N. Phinney, P. Emma
• Magnet candidates and requirements for damping ringsM. Ross, P. Emma, N. Phinney
• DiscussionAll

3. Lunch[1200-1300]

4. Beam physics requirements/issues for DR(con't), beam delivery[1300-1400]

• Magnet candidates and requirements for DR(con't)M. Ross, P. Emma, N. Phinney
• Magnet candidates and requirements for beam deliveryA. Ringwall, T. Markiewicz
• DiscussionAll

5. Alternate PM materials, alternate designs[1400-1530]

• Other PM material options, cost vs. performanceAll
• Other PM variants: rotating designs, shunts, trim coilsAll
• Develop another variant? Which?All

6. Cost [1530-1700]

• PM material costs, sizes, etcAll
• Parts lists for dipole, quad, sextupoleAll
• Controls, facilities needs/costsAll + controls, facilities
• Parametric cost estimatingAll

WEDNEDAY

Working Group Break-Outs(permanent magnets) (0900-1200)

1. Finalize plans and milestones for '00[0900-1000]All
2. Prepare for close-out[1000-1200]All
3. Lunch[1200-1300]

Reports from Working Groups and Close-Out (1300 - 1500)

This page created on 01/06/2000 and updated on August 28, 2000 by Nixx.
[Disclaimers, Copyright, and Other Fine Print]