LARP @ SLAC
SLAC is working on Phase II Secondary Collimators as part of the LHC Accelerator Research Program
Video Meeting Information
- Use the ESNET ad-hoc bridge #885277 (=88LARP)
- You can call into audio by dialing 510-883-7860 and putting in the ad hoc number followed by a # sign
- Here are INSTRUCTIONS that will let you "share your desktop" during an ESNET session (like webex or vrvs)
Joint CERN-SLAC Phase II Collimation Meetings
- These meetings replace the ~monthly video meetings listed above
- Access is typically through
Fermilab sponsored webex
- Browse calendar for meeting date; join meeting; pw is typically 'larp'
Drawings of the Rotatable Collimator
- Drawing Tree
- Up-beam Flex Support
- Up-beam Flex Support Weldment and Housing
- Universal Joint/Gear Hub
- Universal Joint Assembly Bearing Retainer
- Universal Joint Assembly Bearing Support Spacer
- Universal Joint Assembly Bearing Preload Spacer
- Flex Support Assembly - Universal Joint Assembly
- Exploded View of Flex Support with internal Assemblies
Documentation
- FY2007-Q2 Design Update (excerpted from DOE report)
- Conceptual
Design Report for the 1st Rotatable Collimator Prototype
- Rev 2 (12/12/05)
-
Review of the Conceptual
Design Report for the 1st Rotatable Collimator Prototype (12/15/05)
- Review committee's final report
Reports to DOE
- FY07: Q2 (Collimation Tasks)
- FY06: Q1-Q2 (Collimation Tasks)
- FY05-Q3 (all LARP tasks)
Task Sheets
Selected Talks
- 2007-11-07 Talk on Collimation and SLAC Collimators to SLAC ATLAS Group
- 2007-10-18 SLAC LARP CM#9 Talk on Rotatable Collimators
- 2007-10-01 CERN Beam'07 Workshop Talk on Rotatable Collimators
- 2007-06-05 Fermilab DOE Review of all LARP Collimation subtasks
- 2007-04-18 Fermilab Collab Mtg Talk on Secondary Collimators
- 2006-10-26 BNL Collab Mtg Talk on SLAC Secondary Collimators
- 2006-06-13 Fermilab DOE Review of all LARP Collimation subtasks
- 2006-05-11 Collimation Talk at LARPAC at BNL
- 2005-11-04_Motor_Review_RLosito
- 2005-11-04_Motor_Review_OAberle
- 2005-11-04_Motor_Review_ABertarelli
Phase I Collimator Engineering Drawings from CERN
- The Phase_I_drawings directory contains initial release of several different collimator assemblies drawings as well as stands, plugins, etc common to all.
- The collimator model we're working with is LHCTCS, along with the 45 degree base. The final production drawings for this one are located in the PhaseI_final directory. The top level assembly is LHCTCS__0001.
- A viewer for these files is located in the
Phase_I_Drawings/Viewer_HPGL directory.
Employment
Related Web Pages