SLAC/CERN LARP Phase II Collimator Collaboration Meeting-6/15/2005 (24)

9:30:00 AM-5:00:00 PM

 
Agenda: Ralph Assmann - Collimation Project Status
Markus Brugger - Radiation protection constraints and design optimizations
Allesandro Bertarelli - Engineering constraints in the LHC; ANSYS results; Phase 1 mechanical movement by
Mario Santana Leitner - The FLUKA tools and results; Heat load on components
Summary: Goal for this meeting:
1) Review and clearly define all LHC constraints to make sure that the SLAC phase 2 collimator prototype will fit into the LHC!
2) Review the technical details of the SLAC design and possibly provide input to your work.

0 .) id=84  Thomas Markiewicz --  Summary Notes from Meeting  (20 min)

Summary: At the end of the meeting we tried to assemle a snapshot of
- what we think the baseline design is
- what items of the design need immediate work
- what studies need to be expanded
- action items and time scales

See word document for details.

1 .) id=75  Ralph Assmann --  Collimation Project Status  (30 min)

Summary: 

2 .) id=76  Thomas Markiewicz --  SLAC Phase II Collimator Status Summary  (20 min)

Summary: 

3 .) id=77  Eric Doyle --  SLAC Rotatable Collimator Engineering Design  (30 min)

Summary: 

4 .) id=78  Allesandro Bertarelli --  Engineering Constraints in the LHC  (45 min)

Summary: Including ANSYS results & Phase I mechanical movement.

5 .) id=79  Lew Keller --  Collimator Energy deposition Studies at SLAC  (30 min)

Summary: 

6 .) id=80  Mario Santana Leitner --  FLUKA tools & results: Heat Load on Components  (20 min)

Summary: 

8 .) id=82  Markus Brugger --  Radiation Protection Constraints and Design Optimizations  (20 min)

Summary: 

9 .) id=83  Yunhai Cai --  Phase II Efficiency Calculations  (20 min)

Summary: